Loading...
Serving Jupiter, FL and surrounding areas. (728) 221-1120
Your garage or living space deserves a floor that looks as good as the rest of your home. We install metallic epoxy with moisture testing and UV-stable topcoats built for South Florida.
Metallic epoxy flooring in Jupiter, FL is a thick poured coating containing fine metallic powder that swirls and shifts as it cures - creating a one-of-a-kind, glossy finish that looks like polished stone or flowing liquid metal. Most residential projects take two to three days from start to finish, including surface preparation and full topcoat.
If your garage, lanai, or living area floor is showing stains, pitting, or a failing previous coating, metallic epoxy is a lasting solution. Jupiter homeowners also use it when converting garages into gyms, studios, or entertaining spaces. For high-traffic commercial or garage environments that see heavy vehicle use, urethane cement flooring is another strong option worth comparing.
Concrete Decor Magazine notes that no two metallic epoxy floors look exactly the same, which is part of the appeal for homeowners who want a custom look without custom flooring costs. Learn more about decorative concrete finishes at Concrete Decor Magazine.
If you notice small craters, flaking patches, or stains that will not scrub out, your bare concrete is breaking down from moisture and use. In Jupiter's humid climate, unprotected concrete absorbs water, salt, and chemicals year after year. A metallic epoxy coating seals the surface and stops that cycle.
That chalky white film is called efflorescence - it happens when water moves through the concrete and leaves mineral deposits on the surface. It is extremely common on South Florida slabs because of the high water table and frequent rain. It is also a clear sign that moisture is actively moving through your concrete, which a contractor needs to address before any coating goes down.
If you have an older painted or sealed floor that is lifting in patches, that is a sign the previous coating failed - often because of moisture or poor prep. Peeling coatings create trip hazards and expose the concrete to further damage. Metallic epoxy installed over properly prepared concrete is a much more durable solution than repainting.
If you notice moisture on your slab after a storm, your concrete is wicking water from below - especially common in Jupiter homes built on lots close to the Loxahatchee River or low-lying areas near the Intracoastal. A sealed epoxy floor creates a barrier that makes the space more livable, and a good contractor will flag any serious moisture issues before they coat.
Our metallic epoxy service covers everything from the first moisture test through the final protective topcoat. We start by grinding or shot-blasting the concrete surface so the epoxy has a proper mechanical bond - skipping this step is the single most common reason floors fail within the first year. We then apply a primer selected for your slab's moisture level, followed by the base coat and metallic pigment layer. While the metallic layer is still wet, our crew uses specialized tools to create the swirling, three-dimensional pattern you chose. The result is a finish that is genuinely unique to your floor.
Every installation finishes with a clear, UV-stable protective topcoat that guards the metallic layer against scratches, salt air, and South Florida's intense sun. For homeowners who want the artistic look of metallic epoxy but need more structural protection underneath - particularly on outdoor slabs or spaces that see heavy loads - we also offer epoxy floor coatings as a complementary system. Both approaches use the same thorough surface preparation process, so you get a floor that bonds to the concrete and stays there.
Suits homeowners who want a dramatic, high-gloss finish for a garage, gym, or entertainment space.
Suits lanais, sunrooms, and utility areas where a wet floor would be a safety concern.
Suits slabs that test high for moisture - common in Jupiter's waterfront and low-lying neighborhoods.
Jupiter sits in Palm Beach County where average relative humidity regularly exceeds 75 percent from May through October, and the water table is naturally close to the surface in many neighborhoods. Concrete slabs here absorb and hold moisture year-round, and that moisture is the single biggest enemy of a long-lasting coating. Any contractor working in Jupiter who does not perform a moisture test before applying epoxy is setting you up for a floor that peels within a year. We test every slab - and we use a primer designed specifically for South Florida's wet conditions when readings are elevated.
Salt air is another factor that separates local expertise from out-of-town work. Homes in Juno Beach and Palm Beach sit close enough to the Atlantic that salt-laden air puts extra stress on any coating without a proper topcoat. We specify UV-stable, salt-resistant topcoats for all coastal projects, because the finish you see on installation day should still look that way in year five. The Portland Cement Association covers moisture testing standards that apply directly to South Florida installs.
When you reach out, we will ask about the size of the space, current use, and any visible cracks or stains. We typically respond within one business day and can usually schedule an on-site estimate within the week.
Before any work begins, we assess the condition of your concrete and test it for moisture. In Jupiter's climate, this step is not optional - it determines whether the slab needs a moisture-blocking primer before the coating goes down.
We grind or mechanically prepare the concrete surface so the epoxy bonds properly. This is the most important part of the job - and the loudest. Most surface prep takes the better part of the first day.
We apply a base coat, then the metallic layer, swirling and shaping the pigment to create your chosen pattern. A clear UV-stable topcoat goes over everything. Light foot traffic is possible within 24 hours; vehicles wait 48 to 72 hours.
No pressure - just a free on-site estimate and an honest conversation about your slab.
(728) 221-1120Every slab in Jupiter gets a moisture reading before we apply a single coat. South Florida's high water table means skipping this step is a guarantee of early failure. We use moisture-tolerant primers when readings are elevated.
Standard epoxy topcoats can yellow and fade in Jupiter's intense sun, especially on lanais and sunrooms. We use topcoats rated for UV stability so the metallic finish looks the same in year five as it did on installation day.
You receive a written estimate that spells out prep, coats, topcoat, and cleanup before any work begins. No vague line items and no surprise add-ons on the final invoice.
A full metallic epoxy installation is typically done in two to three days, and your floor is ready for full use within the week. We schedule around morning temperature windows so the coating cures evenly - something an out-of-town crew often overlooks.
Every one of these points shows up in the finished floor. A crew that tests for moisture, schedules around Florida temperatures, and backs their work with a written warranty is a crew that expects you to call them with questions five years from now - not complaints.
A moisture-tolerant, commercial-grade system that handles Jupiter's humidity better than standard epoxy in high-use spaces.
Learn MoreThe full range of epoxy systems for garage, living, and utility spaces - from solid color to custom finishes.
Learn MoreSpots fill up fast in the dry season - call today or submit a request and we will be in touch within one business day.